Project Summary
We built an Arduino-based DIY motion detector and trigger IFTTT events from it. You may create IFTTT recipes for receiving email if someone is inside the house or switching a Belkin WeMo when you walk into a room. The motion detector talks to IFTTT using our cloud service Lithouse (https://www.lithouse.co/).
You can make any DIY device and use Lithouse (https://www.lithouse.co/) to talk to IFTTT.
Source by: http://www.open-electronics.org/guest_projects/home-automation-with-diy-ifttt-trigger/
You will need the following components:
- LED, Breadboard and some Wires.
